Important note about SSL VPN compatibility for 20.0 MR1 with EoL SFOS versions and UTM9 OS. Learn more in the release notes.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 25 replies
  • Subscribers 41 subscribers
  • Views 11849 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XG Home throttling bandwidth

Robert Molina

XG Home firewall is throttling my bandwidth. I was able to get ~900MB download on a speed test from my computer through the ISP modem (connected directly). When I was connected through my home router (wired) without the XG home firewall in the network I would get ~880MB download. When I put the XG firewall into the network I now get <300MB. I checked all the traffic shaping configurations that I could find, but I could never get it to where it should be. Is there any traffic shaping configuration that I missed or configured wrong? Thank you in advance for any assistance.

Protectli Vault FW2b

SFOS 18.0.6 MR-6-Build655



This thread was automatically locked due to age.
  • 0 in reply to Robert Molina

    it was an auto correction function, speedstep in the bios.

    Ian

    XG115W - v20.0.1 MR-1 - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to Robert Molina

    For your reference: 

    My E3-1220 can do Gbps with IPS and web policy on WAN. Not sure how accurate that is since all I am doing is a speed test.

    Internal traffic with IPS and web filter can do about 5Gbps on SMB. This could be a bottleneck on the server/client CPU and storage speed.

  • 0 in reply to Robert Molina

    I upgraded my Protectli Vault to the newest one, VP2410.

    J4125 Quad Core up to 2.7 GHz with 8GB of RAM. I also installed a Samsung 256GB SSD.

    I installed SW-18.0.1_MR-1-Build396-396 and currently have my computer connected to the LAN port and the WAN port connected to the ISP provided modem. Although I can get in to the firewall gui and make changes to the configuration, I can never get my computer to go out to the internet through the firewall. I am using it like a desktop firewall for my computer only. Any ideas as to why I have no luck getting out to the internet?

    Thank you for any insight.

  • 0 in reply to Robert Molina

    I found the problem with the install. I was making changes to the network configuration from the console once it booted up, instead of through the webgui. Now it is working fine.

  • +1 in reply to rfcat_vk

     I upgraded the Protectli Vault appliance to the VP2410. It has the J4125 Quad Core up to 2.7 GHz with 8GB of RAM. I also installed a Samsung 256GB SSD This was the answer.

Unfiltered HTML