This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XG Home throttling bandwidth

XG Home firewall is throttling my bandwidth. I was able to get ~900MB download on a speed test from my computer through the ISP modem (connected directly). When I was connected through my home router (wired) without the XG home firewall in the network I would get ~880MB download. When I put the XG firewall into the network I now get <300MB. I checked all the traffic shaping configurations that I could find, but I could never get it to where it should be. Is there any traffic shaping configuration that I missed or configured wrong? Thank you in advance for any assistance.

Protectli Vault FW2b

SFOS 18.0.6 MR-6-Build655

This thread was automatically locked due to age.

Top Replies

Robert Molina over 2 years ago in reply to rfcat_vk +1 verified

I upgraded the Protectli Vault appliance to the VP2410. It has the J4125 Quad Core up to 2.7 GHz with 8GB of RAM. I also installed a Samsung 256GB SSD This was the answer.

0 rfcat_vk over 2 years ago

Hi,

try after you turn off the IPS.

Ian

XG115W - v20.0.1 MR-1 - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Robert Molina over 2 years ago in reply to rfcat_vk

Turned of IPS in the firewall rule. Still only have ~240MB download.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 2 years ago in reply to Robert Molina

Not the rule, leave that on, I am talking about the IPS in the GUI.

Ian

XG115W - v20.0.1 MR-1 - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Robert Molina over 2 years ago in reply to rfcat_vk

Okay... Where is that located? I was looking for it, but could not find it. In the mean time I will turn it back on.
Cancel
Vote Up 0 Vote Down

Cancel
0 Robert Molina over 2 years ago in reply to rfcat_vk

never mind that last response. I checked it and nothing is applied. When I looked at the actual policies, I disabled the LAN-WAN general, the general policy and the LAN-WAN strict. When I checked the speed, it dropped down to <200MB.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 2 years ago in reply to Robert Molina

Please post your firewall rule.

XG115W - v20.0.1 MR-1 - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 Robert Molina over 2 years ago in reply to rfcat_vk

I didn't know which part you wanted, so I captured these.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 2 years ago in reply to Robert Molina

Hi Robert,

The rule looks okay, though I would tick log the traffic to assist with debugging the issue and try using the web proxy. Please describe your XG hardware.

What site are you using to perform your speedtest?

ian

XG115W - v20.0.1 MR-1 - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 splarksop over 2 years ago in reply to rfcat_vk

He mentions in the post "Protectli Vault FW2b" which has a J3060 CPU - a 5 year old, dual core 1.6ghz celeron processor.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 2 years ago in reply to splarksop

I didn't realise that was his hardware.

Ian

XG115W - v20.0.1 MR-1 - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel