Thread Info
  • State Not Answered
  • +2 person also asked this people also asked this
  • Locked Locked
  • Replies 13 replies
  • Subscribers 46 subscribers
  • Views 20059 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multicast mDNS

Martin Schönknecht

Hello is it possible to route 224.0.0.251 that multicast to another interface

at the moment we are using this for apple mobile printing. so the mobile print server is on Port4  and the WLAN iPhones on Port6 (WLAN)

other information:

PrintServer 192.168.12.8 (LAN Port4)

WLAN Device: 192.168.13.78 (WLAN Port6, PoE Switch connected the Sophos AP55C)

I try to establish the communication between the wlan devices and the print server for air print.

 

 

any ideas?

 

cheers



This thread was automatically locked due to age.
Parents
  • 0

    I’ve spent the past few days researching and testing things out and it doesn’t appear Multicast Forwarding will work with forwarding mDNS from one subnet to another. The mDNS IP 224.0.0.50 is a part of the reserved 224.0.0.0/24 Local Network Control Block which cannot be routed. I don’t think Sophos XG has this capability and you would have to setup a separate device that sits on both subnets running an mDNS reflector. Some of the other firewalls like pfSense or OPNsense have an Avahi plug-in that will act as a mDNS reflector.

    ---

    Sophos XG guides for home users: https://shred086.wordpress.com/

  • 0 in reply to shred

    AFAIK, Sophos XG cannot do mDNS. The only thing they've recommended is running mDNS "on a separate server". Well, that's a deal-breaker for me. The inability for Sophos XG to run Avahi/Bonjour/mDNS/whatever is the only reason I'm having to run OPNsense instead :(

  • 0 in reply to John Conkell

    Well that should end my time with short time with XG also I guess. Hard to believe in 2020 mDNS between vlans is not a thing. People have a lot of iOS devices, at home and in businesses. Not being able to print to air printers is an issue. Not wanting IOT devices running free is important. 

  • 0 in reply to Matt Lebowski

    Hi folks,

    in v18 of XG have you investigated the routing tab and if so with what results?

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply Children
Unfiltered HTML