Current network having two interface with different subnet. Both interface connected to same switch without VLAN.
Port 1: 192.168.0.1/24
Port 6:192.168.100.1/23
DHCP Server
Aruba Access Point was placed in 192.168.100.x network, and having static IP Address 192.168.100.1-10, with gateway 192.168.100.1/23.
However user that connected to the access point are assigned with 192.168.0.x IP address.
Is there any way to allow user that connected with wireless access point to request IP Address only from .100 network, and user connected with LAN cable from switch request IP address only from .0 network?
XG210 (SFOS 17.5.15 MR-15)
This thread was automatically locked due to age.