Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 1238 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Force SSL-VPN Remote Users to Use a Specific WAN Link

Baldwin Quibuyen

Hello Everyone:

Need your assistance.  Is this even possible?

WAN1 = 100Mb/100Mb with static Public IP Address

WAN2 =  50Mb/50Mb with static Public IP Address

How will we setup the following?

- WAN1 to be dedicated for SSL-VPN remote users.  Travelling users that connect back to the network using Sophos SSL-VPN Client.

- WAN2 dedicated for internal office users Internet browsing.

Thank you for any insight.



This thread was automatically locked due to age.
Parents
  • FormerMember
    +1 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    You could override the hostname with the WAN1 link under VPN > VPN settings > SSL VPN. Once you make this change,  the SSL VPN configuration only includes the WAN1 link; all the SSL VPN remote users will only connect to this link. 

    For the internal user's internet access, you can specify the WAN2 in the SNAT rule.  

    Thanks,

Reply
  • FormerMember
    +1 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    You could override the hostname with the WAN1 link under VPN > VPN settings > SSL VPN. Once you make this change,  the SSL VPN configuration only includes the WAN1 link; all the SSL VPN remote users will only connect to this link. 

    For the internal user's internet access, you can specify the WAN2 in the SNAT rule.  

    Thanks,

Children
No Data
Unfiltered HTML