This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP55 and APX120 performance differences

Hi folks,

I have recently upgraded my AP55/c to APX120.

I have noticed a performance decrease with the APX120.

Devices were able to connect to the 5ghz SSIDs at up to 866mb/s on the AP55s where as the maximum on the APX120 is 412mb/s.

I have checked the configuration of the APX and cannot see any different settings than on the AP55s.

Devices used a re W10 on an intel NUC, iPad, iPhones, mac mini (early 2020). All devices are running the latest version of OS.

Looking for others experiences with APX120s.

Ian

My XG is running V18.0.4 MR-4 with AP firmware 11.0.014-1.

This thread was automatically locked due to age.

Top Replies

vikino over 3 years ago in reply to rfcat_vk +1

Not much... with ap55 Mac connects 866?

0 LuCar Toni over 3 years ago

Do you use 5 GHz with 80 MHz Band?

__________________________________________________________________________________________________________________
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 3 years ago in reply to LuCar Toni

Hi,

yes I do.

Ian

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 vikino over 3 years ago in reply to rfcat_vk

Strange, both are 2x2, on ap55c i get also 866Mbit and apx740 on 80Mhz 866mbit.

What i miss is 160Mhz channel, 740 it can handle but in XG/UTM there is no way to set it to 160...
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 3 years ago in reply to vikino

Hi,

this forum might be able to help you with the APX740 issue.

wireless forum

Ian

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 LuCar Toni over 3 years ago in reply to rfcat_vk

Can you try to recreate your Wireless Network, if this will resolve something?

__________________________________________________________________________________________________________________
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 3 years ago in reply to LuCar Toni

I will swap them around, one only uses the 2.4ghz channels.

This has been an issue sine I installed them to replace the AP55s with the same setup.

Ian

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 3 years ago in reply to rfcat_vk

Hi,

swapped the devices between networks after disabling the groups. All devices back online still showing the same connection speeds. W10 after a power off and on is 412mb/s.

Ian

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 LuCar Toni over 3 years ago in reply to rfcat_vk

As far as i know, windows uses the channel width and calculate the max speed based on this. Seems like its stuck by 20 MHz, not 80.

Which Channel do you use?

__________________________________________________________________________________________________________________
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 3 years ago in reply to LuCar Toni

I use auto channel configured for 80 Mhz. With the AP55s the same W10 connects at 866 Mhz, so did the Apple devices.

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 3 years ago in reply to rfcat_vk

Hi,

here are a couple of screenshots, the first is from the APX120 and the second from an AP55.

Interesting observation, the Apple devices drop connection speed on the AP55 when idle, but on the APX120 they don't. SO that to me indicates that the APX120 is running a newer version of the WIFI standard that makes the Apple devices much happier.

APX120

AP55

I think the above screenshots make the issue very clear.

Ian

XG115W - v20 GA - Home

XG on VM 8 - v20 GA

If a post solves your question please use the 'Verify Answer' button.
Cancel
Vote Up 0 Vote Down

Cancel