Hello,
I have a Qotom with a j1900 Celeron, 8GB ram 64GB SSD and 4 Intel NICs.
It has happily been running UTM9 for a while. I tried moving to XG 18 and it freezes after install.
I have tried both SW-18.0.1_MR-1-Build396-396 and SW-18.0.3_MR-3-457
I got the bios set so that it does recognize the drive and I can successfully install with a USB stick. However it does not reboot after pressing y, I must force it off. Then as soon as I connect to the web interface, it freezes.
I can start a continuous ping to 172.16.16.16, then I connect to the web interface. As soon as I click proceed on the security certificate, I start losing pings.
I go back to the console, and it is not responsive to keyboard input.
I have read all the posts I can find on the subject. The only thing I have not done is start disabling unused hardware in the bios, which I will look into today.
There shouldn’t be any extra hardware though. There is a VGA port, 4 usb, and 4 nics.
Thank you
This thread was automatically locked due to age.