Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 39 subscribers
  • Views 709 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSEC Scenario, cant route specific traffic

Antonio Beired

Hello everyone.

im getting crazy with this...

I have 2 sites, one withe 192.168.21.0/24 and the principal Site with the 192.168.19.0/24.
I have a linksys connected to the sophos via ipsec and i can see the 2 networks without any problem. But, i have a machine in the secondary site that needs to go out to the internet via the 192.168.19.20 router that its in the LAN.
In the principal site there is no problem because i have a routing in the sophos.

Even with a full tunnel its not working...
Can u help me please??

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    IPsec Issues could be caused by the Sophos End or the other End. 

    Follow the packet if possible. So ping from your sophos End to the other end and check in the packet capture of XG. Do you see the packets?

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    OK! Now i have ping over the tunnel with everything, but the pages that uses the 192.168.19.20 didnt charge at all. With the Sophos Client connect works.
    Maybe some DNS related problem over yhe ipsec connection?

Reply Children
No Data
Unfiltered HTML