Hi,
is it possible in SFOS 17.5.14 MR-14-1 to configure an interface with tagged VLANs only? I don't want to have an IP on the physical interface (untagged).
This thread was automatically locked due to age.
Hi,
is it possible in SFOS 17.5.14 MR-14-1 to configure an interface with tagged VLANs only? I don't want to have an IP on the physical interface (untagged).
i theory you're right, but I can confirm that when I configured a wan interface a for an ISP, the Interface had to have an IP Assigned to it to allow the config of the VLAN to connect to the ISP, so I configured 128.0.0.1/32.
XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!
You do not have to do this anymore in V18.
V18 allows a VLAN interface on a non configured Interface.
(Be aware, do not remove the config of the hardware interface after placing VLANs. That will remove the VLANs as well!)
__________________________________________________________________________________________________________________