This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG 125

Hi , experts

We have configured xg 125  firewall on our network as gateway.  we have port forward; ports 110,25,587,3000,143 for our mail services 

we have internal mailsever with static ip (192.168.0.99) . We have created alias interface and firewall rule on the same

we are using outlook to  send and receive emails.   

On LAN we can only receive emails when we put mailserver internal ip as incoming and outgoing servers with ports 110 and 25 in order.

also we can access webmail on LAN using mailserver ip and public ip with no problem. 

all ports 110,25,587 are open when tested on LAN

BUT when we change incoming and outgoing server in outlook emails can't be received but brings error x80042108

we want to use public ip to send and receive emails on any network 

HOW CAN WE SET DO THIS



This thread was automatically locked due to age.
  • Hi,

    your internal  mail server should only be using port 25 or 587, mail servers do not usually receive pop mail that is a cline function.

    If you are receiving mail errors then your users are not pointing at your mail server.

    Please review your user's mail configuration.

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.