Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 37 subscribers
  • Views 2046 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG firewall 18 [SW-18.0.1_MR-1-Build396-396] will not install on B450m motherboard

Fenster99

I get "reboot and select proper boot device or insert boot media in selected boot device"

I got this the last time I tried to install on this motherboard too, and the solution was to install on an intel motherboard based machine and swap the hard disk after install. That machine is not available.

What is the fix for this? Thanks in advance.



This thread was automatically locked due to age.
Parents
  • +1

    Hi,

    besides that motherboard being a complete overkill for a firewall, have you installed a second NIC?

    You will need to have the BIOS is non UEFI mode.

    Finally why are you trying to re-install XG when you had it installed and could have just used the upgrade version to your exiting version?

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • +1

    Hi,

    besides that motherboard being a complete overkill for a firewall, have you installed a second NIC?

    You will need to have the BIOS is non UEFI mode.

    Finally why are you trying to re-install XG when you had it installed and could have just used the upgrade version to your exiting version?

    Ian

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML