After Upgrade from 17.5 MR13 to MR14 Sophos VPN CLient fails to connect (urgent)

Hi juergenb52 

Thank you for reaching out to the Community! 

Are you able to see the traffic from your public IP address on port 8443 on the firewall? 

Check out the following KBA: Sophos XG Firewall: How to monitor traffic using packet capture utility in the GUI.

Is this issue affecting all the users or only specific users? Have you restarted your workstation after reinstalling the client and config? 

Thanks,

Thanks Patel,

i had my Home Office VPN Client connected to the XG 17.5 MR12 and was connected to my office desktop.
From Office Desktop i upgraded to MR13, it took some time until the upgrade was done and the VPN Client connected againg to MR13.

Next Step was to upgrade to MR14, after 20minutes still no VPN.

MR14 is up and running for most of the rules (i hope).

I did a capture today and Diagnostics with BPF 'dst port 8443' gives two captured packets.

First packet says ... Source IP, Dest IP, Packet, Ports, and ... 

Status: Violation
Reason: Local_ACL

I use VPN on external E1 (WAN).
And i had disabled (Apply) enable (Apply) Local Service ACL in Admin/Device Access -> WAN / SSl VPN

Its not confidence inspiring that a simple Update from Release 1 to Release 2 works for the simplest things in a firewall.

What else can be wrong in a upgrade ...

Thanks

Jürgen

Hello,

Any update about this problem?

Hello Luana,

Thank you for contacting the Sophos Community!

If you are being affected by this please open a ticket with support for further investigation, Jurgen was able to resolve his issue connecting from a different Client. When opening the ticket please do a drop packet capture and add this to the ticket, also send me the Case ID so I can follow-up!

console > drop-packet-capture 'port 8443' 

Modify the port accordingly to the one you are using.

Regards,

Hello Jayson,

Thank you for contacting the Sophos Community!

If you are being affected by this please open a ticket with support for further investigation, Jurgen was able to resolve his issue connecting from a different Client. When opening the ticket please do a drop packet capture and add this to the ticket, also send me the Case ID so I can follow-up!

console > drop-packet-capture 'port 8443'

Modify the port accordingly to the one you are using.

Regards,

Hi Emmanuel!

It's ridiculous that WE as a customer should do all the work for support.As you can see, the problem is widespread and the solution "to connect from another PC" borders on mockery. How are we going to tell that to the 100 employees? Buy a new PC now and log on from there?
I had opened a support case about this, but the great Indian support just closed the case without a solution. I escalated, but that didn't help either.It's really sad to see that Sophos doesn't care about end users.

Best regards,

Christian

Hi Christian,

Can you provide support ID for your issue?

Regards,

Alok

Hi Luana,

if you have opened support case, can you provide case ID?

Regards,

Alok

Hi Alok,

here is the case number: 03081175

Regards,

Christian

Hello Christian,

Thank you for the Case ID.

I think there was a misunderstanding, I never said to buy a new computer, rather than he tried from a different computer. 

Checking on the ticket, I can see there was no reply from Sep 4, so the case got closed. I will ask the engineer to open the ticket and reach out to you.

Additionally to this, if you enable Support Access and send me via PM the Access ID, I could create a test user and try to replicate the issue, so I can add this into the ticket to expedite the investigation.

Monitor & Analize >> Diagnostics >> Support Access >> ON >> Access Status >> And copy & paste the Access ID and send it to me.

Regards,

Hi Emmanuel!

That is not correct!
I have answered via eMail on Sep 7th with detailed information regarding this case. Afterwards the case was closed on Sep 10th.

In the meantime I have tested this my self to find asolution and it only doesn't work for existing users!
If I create a new user the new user can connect successful!

But that's no solution. I can't tell all my customers: "We will upgrdade your firmware, but by the way all users need to reinstall the VPN access."

So it has something to do with existing users, which have already used the VPN access.

Please give me a eMail address and I can send you my eMail from Sep 7th.

Best regards, 

Christian

Hi Christian,

i think sophos is not realy testing their release versions. They let the customer do this.

Hi Christian,

i think sophos is not realy testing their release versions. They let the customer do this.