This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DMZ Access from WAN

Hi, 

 

I'm struggling to gain access to a server in my DMZ from the WAN on my XG310. Im convinced its something simple as i've been able to allow access from Wan to an internal server in my LAN .

I have ports 2 and 6 configured as WAN access (port 2 is and backup for 6), with my DMZ server plugged into Port 3.

Port 3 is configured with IP 172.x.y.2 and the server i'm gaining access to is 172.x.y.11 I am looking to connect on port 2247.

 

My DMZ server can access the internet 

I'm running a XG310  with v18 and have the following set up:

 

 

 

 

 

Any ideas?



This thread was automatically locked due to age.