Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 3 replies
  • Subscribers 12 subscribers
  • Views 1223 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port forwarding for Qnap OpenVPN server

Massimiliano Scarabotti1
10 months ago

Hi. I know XG 135 have an OpenVPN server builtin, but I wan't to use a Qnap NAS as OpenVPN Server.
I configured OpenVPN Server on Qnap, and I forwarded port 1194 from Wan interface to Lan (IP of Qnap); the connection from my PC to the VPN works perfectly, but I can't reach any device of the Lan.
Where is the problem? Is there other firewall rule I have to set? Thanks for your support!



This thread was automatically locked due to age.
Parents
  • 0 10 months ago

    Massimiliano,

    check the XG logs to understand if other ports are required. Make sure that the routing table on the vpn client has the remote vpn network correctly populated.

    Regards

Reply
  • 0 10 months ago

    Massimiliano,

    check the XG logs to understand if other ports are required. Make sure that the routing table on the vpn client has the remote vpn network correctly populated.

    Regards

Children
No Data
Unfiltered HTML