i have MPLS link as a wan interface (its connect me to more than 20 branches )
i have used the following article to configure IPSEC VPN as a backup for MPLS
but i can only create 1 IPSEC as a backup
can i add multiple lines?
system link_failover add primarylink Port2 backuplink vpn tunnel Branch1 monitor PING host 10.16.1.1
system link_failover add primarylink Port2 backuplink vpn tunnel Branch2 monitor PING host 10.16.2.1
system link_failover add primarylink Port2 backuplink vpn tunnel Branch3 monitor PING host 10.16.3.1
Firmware Version: 17.0.8 ( i can't upgrade the firmware for the moment )
I think you should be able to add multiple IPsec VPN connection as a backup for your MPLS link. When you say you could only add one as a backup, are you getting any error or issues?
Community Support Engineer | Sophos Technical SupportSupport Videos | Product Documentation | @SophosSupport | Sign up for SMS Alerts If a post solves your question use the 'Verify Answer' button.
V17.0 will have other issues. I am not sure. Maybe you run into a Bug or something like that.
I highly recommend to upgrade the firmware.
I will check with an updated device.
yes i got the error below.
are you sure the port and the ipsec tunnel are correct?
Is the ip a remote host ip?
Yes, i tried to delete the first failover link and everything work.
but when im trying to add another failover link it show me the failed message.
check the screen below.
I still get the same problem even with the last firmware.