Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 13 replies
  • Subscribers 38 subscribers
  • Views 4357 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firewall rule does not work.

AussieTom

Hello

 

I got a XG firewall and after I saw wierd traffic coming from a browser I added a firewall rule to block the suspicous traffic. Although the traffic still flow, it does not care about the rule. How does that can be?

The rule is added on top, and there is no other interference. I succesfully operate this firewall with all other rules working. I just cant believe that.

 



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    open logviewer and create a filter for the IP address of the device and see which firewall rule is allowing the traffic out.

    Ian

     

    Fixed spell checker mistake which made the sentence totally incorrect.

    XG115W - v20 GA - Home

    XG on VM 8 - v20 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    Thanks for your reply. The problem is that the traffic is allowed not disallowed. There is a drop traffic firewall rule on top, which is based on a IP range. The problem is that the rule stands there activated, but its just ignored by the firewall, like its non existant. I can add other rules, and they are all working as intended. Log Viewer and other tests proof it. Just this particular IP range wont get blocked by the firewall, for a reason I cant understand.

  • 0 in reply to AussieTom

    Tom,

    please share the firewall rules.

    Thanks

Reply Children
Unfiltered HTML