Advisory: Support Portal Maintenance. Login is currently unavailable, more info available here.
Hello,
I configure Sophos 10 for our remote office.
I configured the device in our main office, by doing following:
I connected it to our modem with a DHCP IP, and configured the device I see it in the device management, and I have the unlock code. I connect a laptop in the RED device and it was working fine
After that, I disconnected the device, and sent it to our remote office. The remote office has a router, so I connected the Sophos to the WAN port. And it doesn't work.
The sequence led is following:
Device is powered on
Power-LED and WAN led are steady - about 45 seconds later System LED turns on - 10 seconds later Router LED turns on - then Tunnel LED is on, after a few seconds the LEDs of System, router, internet and tunnel are off and then the are on again.
Has anyone experienced the same?
RED10 is End of Life. https://community.sophos.com/kb/en-us/121502
I would highly recommend not to use such Hardware for productive environments anymore.
__________________________________________________________________________________________________________________