• Does a RED in Standard/Split block any traffic at the remote office that's destined to or from the internet?

    I have a client using a SG115 at the main office and a RED10 at their remote office. The remote office used to have a home router that managed the lan. We replaced it with the RED10. The RED10 is configured in Standard/Split and internet browsing and…

  • Sophos RED 15 not working

    Sophos RED15 not booting properly, System light is on, Router is blinking - somtimes it comes on and then no internet connection is possible and the red is restarting.(i can see the lease on the DHCP server but RED ist never pingable) DHCP in the network…

  • Ich bekomme die RED 15 nicht im transparent/Split Modus zum laufen

    Anbei der Logfiel, ich drehe noch durch 2016:01:14-23:48:23 utm red2ctl[21642]: Overflow happened on reds1:0 2016:01:14-23:48:23 utm red2ctl[21642]: Missing keepalive from reds1:0, disabling peer 79.199.30.122 2016:01:14-23:48:23 utm red_server…

  • RED15 drop

    Hi, My setup is below: UTM 9.351-3 RED15 in location in Transparent / Split, set to DHCP in the main office when the Internet drop for a seconds then we can't connect to the RED device anymore. it has to be rebooted. Is there any way to fix…

  • Is there a solution to connect the WAN to a WLAN?

    The case is this: A customer has just WLAN in his homeoffice and would like to connect the RED-box with WLAN to his Router, which is located at another room. Is that somehow possible? It's clear that he should have a stable WIFI-connection. It's…

  • RED out of line

    I would like to connect a RED device out of line, so that its WAN interface is connected to the local LAN. This works and connects back to the UTM but can I then point a server at the RED WAN interface and have the RED route it out? Does anybody have…

  • UTM to UTM link aggregation?

    Hi! Just a quick question: When connecting two UTM using a RED tunnel, is it possible to aggregate/bond WAN links on one of them in order to get a higher throughput? I need to connect a branch office using two or three slow DSL lines to the main office…

  • RED15 setup Standard / Split and need to NAT a device off the remote IP.. can it be done?

    I've got a camera system in a remote location and require to monitor it using the remote location IP rather than the traffic traveling back through the RED to the UTM. It still needs to be a UTM managed ip address so therefor the standard mode. Are we…

  • RED15 reconfiguring

    Hi, i have little problem in reconfiguring our RED15 device. It is the first RED device we have. I configured it for testing purposes for my home network. At home i have no DHCP Server, so i configured a static ip like (192.168.179.20/24) and used…

  • Guest Wifi on RED10 (with AP10) using REDs internet (no split)

    I have a RED 10 and AP10 and I have the RED working in Standard/Split with a single wifi network for corporate devices. What I want to do is create a Guest wifi network which only has internet access, preferably going direct to the internet with the…

  • wpad.dat

    Within the environment I am currently working on we are using Sophos UTM v3.15-2. We have currently been looking for solutions on how to un-clutter the web filtering logs which are containing roughly 20,000 WPAD.dat logs a day within the logs. Is there…

  • RE: Disconnect Loop RED 15 -

    Hi DRSmokey, That is a very interesting workaround! I will try this for one of our clients on a RED50. Can I ask when you look at the RED live logs does it also always show a ping and pong response of 0 for the RED v2 protocol? : 2015:12:07-12:51…

  • RED15 setup

    hi, I followed administration guide 9.351 to set up RED15. So I configured RED device in a transparent/split mode and I see on RED device all led are green. device connected to RED15 is getting ip over dhcp from router, however I can't ping or connect…

  • Use UTM to UTM RED technology to replace IpSec VPN tunnel ?

    Hello all, I'm new in Sophos UTM world, so I have what can be a real beginner question: Is it a good idea to use RED technology to set-up a site-to-site tunnel between two UTM (sg-310 and sg-125) instead of setupping an IpSec VPN tunnel ? I took…

  • red setup

    Hi there, I use Sophos UTM and I would like to deploy a box to all my customers and be able to manage that box over https and ssh, but device will be also connected to the customer switch to get ip via dhcp. So I was thinking that RED in transparent…

  • How to pass PCI Compliance scan when RED (tcp/3400) uses a weak cipher?

    Our recent PCI Compliance scan came back failed because the RED service uses RC4-SHA. This is also one of the issues that the scanning company (Trustwave, who is used by our credit card processor, FirstData) will not allow to be overridden. If this is…

  • RED

    hi, I want to manage one server in remote location. I do not want to manage a whole network. I have utm and red 15. Is it possible to do it? If I plug in a wan link on red to switch and then server to lan on red then will that work?

  • Disconnect Loop RED 15 -

    Hi, ich have a very strange problem with the new RED 15. Setting: UTM 9.350-12 at the main office RED 15 with static IP behind an LTE-router at the remote location After the first configuration everything works fine. But after some hours the…
Unfiltered HTML