This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hotspot and Cisco APs

We use the Hotspot functionality of the UTM and have integrated the Cisco Access Point Solution. 

We use Firmware 9.408-4 on the SG 230

 

As long as we do not involve the hotspot Functionality but try  to access the provoded Guest WLAN through the Access Points directly, it works. 

But we want the Voucher Services from the Sophos UTM to regulate guest access.

 

If we enable the Hotspot function, we are no longer able to access the internet or  the voucher web page from the Computer that is in the guest wlan.

The VLAN we setup is 254.

Thus we provied a DHCP Server in this net and enabled NAT Masquerading as several best practise guides recommended.

 

I can reach the network 10.0.254.x, I do get a DHCP Address from the Sophos UTM and although the settings are made

I cannot ping the 10.0.254.254 address and do not get the login webpage. 

It seems as somehow the route is not set or working correctly.

 

I can ping the guest network of the WLAN Controller.

I would be happy if someone could provide me with a solution or point me in a direction where to look further.

 

regards

Oliver K.



This thread was automatically locked due to age.
Parents Reply Children
  • Usbkey said:

    The basic idea is 

    If you AP supports VLAN then you can create a SSID map to VLAN and then create a wifi hotspot associated to the same VLAN on your UTM

     

    I have 2 Sophos AP30 running a Guest Hotspot on a dedicated subnet, I want to add my aruba to the same existing hotspot, not to create one. Thank you.

  • It is even easier.

     

    Create a SSID as the same name of you guest WIFI on your aruba AP

    Map this SSID to your dedicated subnet for guest

     

    Done !

     

    But of course in future if you want to change password then you will have to login to HP Aurba AP to change it as it can not be managed from UTM

  • Usbkey said:

    It is even easier.

     

    Create a SSID as the same name of you guest WIFI on your aruba AP

    Map this SSID to your dedicated subnet for guest

     

    Done !

     

    But of course in future if you want to change password then you will have to login to HP Aurba AP to change it as it can not be managed from UTM

     

     

    Yes, but doing like that the voucher would be managed by aruba if connected to it, while from utm if connected to the sophos ones.

    Is there no way to manage them all from utm?

  • I don't have any experience with HP Aruba APs, but I think you just don't use hotspot feature on Aruba APs. Use your UTM device to manage vouchers.

    Manage Aruba AP from Sophos UTM? that will be a nice feature to have and I vote for Cisco AP as well.

  • Usbkey said:

    I don't have any experience with HP Aruba APs, but I think you just don't use hotspot feature on Aruba APs. Use your UTM device to manage vouchers.

    Manage Aruba AP from Sophos UTM? that will be a nice feature to have and I vote for Cisco AP as well. 

    I'm trying to configure the aruba side to work with the existing hotspot.

    Having hard times doing so, anyone here has experience with Instant manager?

    Thank you.