Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 1 subscriber
  • Views 24152 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG125w WPA Password always incorrect

awesomo
I have an SG125W. I am trying to setup the wireless.

I went into Global Settings and allowed the internal interface.

I created the wireless network under "Wireless Networks" and enabled WPA2 Personal and set "Bridge AP to Lan".

Under "Access Points" localwifi0 has the wireless networks checked off.

Then when I activate the wireless networks, the SSID's show up, but the WPA2-PSK AES key never works, it always says it is incorrect.

So I plugged in an AP15, disabled the wireless networks on LocalWifi0 and enabled them on the AP15, and everything worked. Same SSID, same passwords.

What am I missing here?


This thread was automatically locked due to age.
Parents Reply
  • 0 in reply to BAlfson

    Thought this was fixed in 9.4, so this "workaround" was supressed - but no! :-)

    Still works fine with the bridging though - but how to do with seperate zone and w-models? - Create an interface on one of the avail. eth's and do a bridge there also, leaving wifi to bridge to ap lan?

    Happy weekend :-)

    -----

    Best regards
    Martin

    Sophos XGS 2100 @ Home | Sophos v20 Technician

Children
No Data
Unfiltered HTML