Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 1 subscriber
  • Views 24152 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG125w WPA Password always incorrect

awesomo
I have an SG125W. I am trying to setup the wireless.

I went into Global Settings and allowed the internal interface.

I created the wireless network under "Wireless Networks" and enabled WPA2 Personal and set "Bridge AP to Lan".

Under "Access Points" localwifi0 has the wireless networks checked off.

Then when I activate the wireless networks, the SSID's show up, but the WPA2-PSK AES key never works, it always says it is incorrect.

So I plugged in an AP15, disabled the wireless networks on LocalWifi0 and enabled them on the AP15, and everything worked. Same SSID, same passwords.

What am I missing here?


This thread was automatically locked due to age.
Parents
  • 0
    Very weird that you can't bridge the internal AP to the lan

    I think this is a known bug.  My workaround solves the problem, but, if I understand you correctly,  the one described in the KnowledgeBase apparently does not.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson
    We had the same issue as the OP with an SG115W. FW v.9.313-3 Couldn't authenticate to network using internal wireless bridged to AP lan.  Added Spare AP30 to same configuration and removed the internal and we were up and running.  I'm starting a support call but this is something that should have been fixed prior to hardware release. 

    I understand that an external AP is different from internal but I can't find any kind of documentation that says the configuration should be different.
Reply
  • 0 in reply to BAlfson
    We had the same issue as the OP with an SG115W. FW v.9.313-3 Couldn't authenticate to network using internal wireless bridged to AP lan.  Added Spare AP30 to same configuration and removed the internal and we were up and running.  I'm starting a support call but this is something that should have been fixed prior to hardware release. 

    I understand that an external AP is different from internal but I can't find any kind of documentation that says the configuration should be different.
Children
No Data
Unfiltered HTML