Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 1 subscriber
  • Views 18435 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP50 and AP100 expected throughput

JoelPatterson
Hey guys,
I know this topic has come up several times, but usually it's related to firmware or something similar. I just want to know what's "normal" for AP50/AP100 throughput.

Negotiated speed shown in UTM web interface is 866Mbit. Currently max test ed speed I'm getting on an AP100 is ~75 Mbits/sec. Same for AP50's. This is tested with iperf. Over my Gbit connection with the same iperf setup I get 975+ Mbits/sec.

All AP's are running through gigabit ethernet, showing as 1000 full duplex on the switches. They are bridged to their own VLAN with no throttling that I'm aware of.

Maybe I'm missing some type of config on the switch ports? Jumbo frames? MTU settings? idk, grasping at straws trying to figure out why I can't even get close to the "866 mbit" speed.


This thread was automatically locked due to age.
Parents
  • 0
    Max I've ever gotten was 103 Mbit  per second. 
    Ap 50
    Windows 7 client, AC wireless
    Window 2008 server
    Gigabit switch with jumbo frames

    --------------------
    Private: 1 Mini ITX (EMB-CV1), Atom D2550 1.86 GHz Dual Core CPU, 8GB RAM, UTM 9.3 Home License, AP100
    Business: 2 UTM320 in HA (Active/Passive), Full Guard, 7 AP50's, 1 AP100

Reply
  • 0
    Max I've ever gotten was 103 Mbit  per second. 
    Ap 50
    Windows 7 client, AC wireless
    Window 2008 server
    Gigabit switch with jumbo frames

    --------------------
    Private: 1 Mini ITX (EMB-CV1), Atom D2550 1.86 GHz Dual Core CPU, 8GB RAM, UTM 9.3 Home License, AP100
    Business: 2 UTM320 in HA (Active/Passive), Full Guard, 7 AP50's, 1 AP100

Children
  • 0 in reply to JoelPatterson
    More results.
    The AP 50 2.4ghz and 5.0ghz bands are set to 40mhz channels.
    On 5ghz SSID.
    The maximum throughput was 140Mbits/sec, not repeatable.
    Repeatable was 120Mbits/s
    On 2.4hz SSID
    Maximum throughput was 69Mbits/s, though various network monitors did show peaks over over 75Mbits/s.

    Ran most tests for 60s with window of 2000k
    -t 60 -w 2000k

    I tried various test to see if I could locate the bottleneck.
    The LAN (VM server) to LAN (parallels W7) throughput reported over 800Mbits/s.

    The server and the W7 machines are all virtual. The W10 machine is a physical machine.

    Ian M

    L3 switch is a Netgear 716

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML