This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless issues since AP55 Install

I recently purchased an AP55 to replace my old AP30.

The AP30 was rock solid and I never had any issues. But now I am dropping 2.4 GHz connections all the time and a power reset of the AP is is the on;y thing that fixes it.

It's a pretty basic setup.

One VLAN with dedicated 2.4 and 5GHz SSID's. 2.4Ghz radio was set to auto channel but I also tried dedicated channels.

Anyone have or see any wireless issues?

Chris

This thread was automatically locked due to age.

Scott_Klassen over 9 years ago

What version of UTM are you running and have you contacted support yet (if you have a paid license)?

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel
ChrisBaksa over 9 years ago in reply to Scott_Klassen

I have an SG125 Appliance with a 3 year Full Guard License. Its at build 9.351-3.
I have not contacted support yet. But I will try to do that next week.
I figured I'd Ask here first.

Its not a problem that I can just make happen. It builds over time.

Chris
Cancel
Vote Up 0 Vote Down

Cancel
AndreasRieger over 9 years ago in reply to ChrisBaksa

Hi ChrisBaksa,
does the AP drop all devices, or only apple devices? There exists an UTM WIFI Bug for Apple Devices.

Cheers Andreas

UTM SCE/SCA | Endpoint SCE
Cancel
Vote Up 0 Vote Down

Cancel
twister5800 over 9 years ago

Just to get clear: you have one ssid for 2,4 and one for 5ghz?

How is the fast transitioning setting set?

-----

Best regards
Martin

Sophos XGS 2100 @ Home | Sophos v20 Technician
Cancel
Vote Up 0 Vote Down

Cancel