Sophos AP-30 layer 1 down after license upgrade on sg105?

RE: Sophos AP-30 layer 1 down after license upgrade on sg105?

BAlfson — Sun, 17 Jun 2018 19:58:45 GMT

Plus, that will give you a chance to see if the issue is the power supply or ???

Cheers - Bob

RE: Sophos AP-30 layer 1 down after license upgrade on sg105?

mysterioustranger — Sat, 16 Jun 2018 21:13:57 GMT

Thank you Bob! I was thinking the same. I'm seeing there's not much point in using 3rd party routers or APs to serve up the wireless as I would lose all the filtering and control that UTM offers.

RE: Sophos AP-30 layer 1 down after license upgrade on sg105?

BAlfson — Sat, 16 Jun 2018 17:46:53 GMT

I see an AP 30 on eBay that's about $80 with shipping.

Cheers - Bob

RE: Sophos AP-30 layer 1 down after license upgrade on sg105?

mysterioustranger — Sat, 16 Jun 2018 13:45:34 GMT

Good Morning/Afternoon Bob!

No unfortunately the ethernet connection is still down between the AP and any ethernet ports on the sg105. I normally have it connected to eth0 . The NIC lights don't turn on nothing is recognized. At this point, I can't think of anything else to try besides swapping out the AP with a home wireless router in AP mode.

RE: Sophos AP-30 layer 1 down after license upgrade on sg105?

BAlfson — Fri, 15 Jun 2018 12:26:39 GMT

"It's now back to where I started where the layer 1 is down to the AP but everything works ok if I'm hard wired to SG105 ethernet ports."

Do you mean that the AP works correctly when there's an Ethernet cable with one end plugged into the UTM and the other plugged into the AP?

Cheers - Bob