Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 3 subscribers
  • Views 9920 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Full Transparent Mode

NimaMirzaei

Hi people

Issue is about full transparent mode, when enable web protection in full transparent mode for network 10.93.0.0/24
It does not work properly . In picture you can see my routing config  .

Utm doesn't have internet on wan ip address.

But in next steps router give internet to 10.93.0.0/24

do you have any idea??



This thread was automatically locked due to age.
Parents
  • 0
    Hi, Nima, and welcome to the UTM Community!

    What do you mean by "route 10.93.0.0/24 to 192.168.0.2?" Please insert a picture of your static route.

    Do you have a masquerading rule for 10.93.0.0/24 in the router to the internet?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi BAlfson , thank you for welcoming and sorry for my latency.
    I mean:
    ip route 10.93.0.0 255.255.255.0 192.168.0.2
    About masquerading I should say yes .

  • 0 in reply to NimaMirzaei
    Router B also needs a gateway route 10.93.0.0/24 -> 172.16.0.2. There must be no masquerading rule in router A or the UTM, but there must be a masq rule in router B like '{10.93.0.0/24} -> {WAN connection}'. In Full Transparent mode in the UTM, 10.93.0.0/24 must be in 'Allowed Networks'.

    Are all of those in place? if so, then try #1 in Rulz - community.sophos.com/.../74722

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0 in reply to NimaMirzaei
    Router B also needs a gateway route 10.93.0.0/24 -> 172.16.0.2. There must be no masquerading rule in router A or the UTM, but there must be a masq rule in router B like '{10.93.0.0/24} -> {WAN connection}'. In Full Transparent mode in the UTM, 10.93.0.0/24 must be in 'Allowed Networks'.

    Are all of those in place? if so, then try #1 in Rulz - community.sophos.com/.../74722

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML