This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9.101-12 at 80% internittently

Hi all,

i recognized  today that for four ours my box was permantenty at 80% CPU-load.
Today I cheched that and to shows me that http-Proxy is a 290% ([:)] ). I think it´s due to hyperthreading.
ITs from  12 to 4 p.m. arround and then it drops down. It´s not related to the postgre-Topic.
Any Ideas?


This thread was automatically locked due to age.
  • the same issue .. @ 4 p..m. bammmmm
    after a httpproxy restart everything fine.

    we disable the virus scanning and want to see this evening again to this.
  • For a short period even disabled all virus-scanning but even that did not help.
  • Same here.
    First did a /var/mdw/scripts/httpproxy restart which didn't help.
    Then switched from Sophos to Avira and above restart command. Yeahh, down to 45% CPU.......  for 2 minutes. Top shows 180% now for httpproxy again.
  • aaand running on 100% again... [:(]


    So because I've already switched to Avira, I don't thinkt this is related to virusscan.


    is http the top process?
  • aaand running on 100% again... [:(]


    So because I've already switched to Avira, I don't thinkt this is related to virusscan.
  • Yesterday it happened again, but after a few hours it stopped by itself


  • Same problem here yesterday on my home box.
    I only noticed it through the executive report.





    Few minutes ago I looked into the WebAdmin and CPU was stuck at about 60%, but the Live Chart and "top" were showing this:







    After restarting the HTTP Proxy, everything went back to normal.

    I will also switch the AV engine to Avira
  • Hi, wootr, and welcome to the User BB!

    I think you may have uncovered a different issue.

    Did you restart httpproxy?

    Please [Go Advanced] below and attach a picture of the weekly CPU and Memory graphs.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • I just got a complaint from a customer about this very issue.  CPU was at 100% with httpproxy at over 99%.  He had changed the single-scan engine to "Sophos."  I did /var/mdw/scripts/httpproxy restart, and httpproxy went down to 40-45% immediately.  That allowed me to login to WebAdmin, where I changed to the "Avira" engine.  An hour later, CPU is still at 3%.

    I have submitted a trouble ticket that will, I expect, lead to a bug report.

    Cheers - Bob
    PS For anyone using Endpoint, it's also a better practice to use a different engine, Avira, at the periphery.


    Just FYI, changing to single-scan mode with Avira does not resolve the issue. The httpproxy is hanging in the EpollWorker_ thread (see the attachment). [ATTACH]10254[/ATTACH]
  • Sorry - just saw the post that it will be fixed in 9.102.