Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 39 replies
  • Subscribers 8 subscribers
  • Views 64496 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSec VPN keeps down after DSL lines reconnects...

zaphod

i run several ipsec tunnel for years without any problems... all runs fine with 9.355-1


since the update to 9.402-7 all ipsec tunnels are down every morning.


i checked the ipsec-logs and found out that after my dsl-lines reconnect the tunnels will not come up again.

i have to turn them off and on and then all works....


anyone can help?



This thread was automatically locked due to age.
Parents
  • 0

    I have this Problem for more than a year now with all versions up to 9.402 ...

    The only workaround was a cron job that restarted the UTM every night after the VDSL reconnects.

    But even then, after some weeks it only helps to turn power off and on again ...

    It happens on multiple SG125  as well as on a software version runing as a VM ...

    Until now it was sporadically every 2-3 Weeks, now it's every day after pppoe reconnects. ( German Telekom VDSL )
    Suphos support ignored my requests for month ! 

    I think these support guys should talk directly to our bosses , mine are also "not amused" when they cannot work from remote.

    I also did throw out the money for the SG's

    In my case it's people in 2 Offices cannot work !!!

    It is absoutely annoying that vital, basic things like these take month to be seen and fixed ...

Reply
  • 0

    I have this Problem for more than a year now with all versions up to 9.402 ...

    The only workaround was a cron job that restarted the UTM every night after the VDSL reconnects.

    But even then, after some weeks it only helps to turn power off and on again ...

    It happens on multiple SG125  as well as on a software version runing as a VM ...

    Until now it was sporadically every 2-3 Weeks, now it's every day after pppoe reconnects. ( German Telekom VDSL )
    Suphos support ignored my requests for month ! 

    I think these support guys should talk directly to our bosses , mine are also "not amused" when they cannot work from remote.

    I also did throw out the money for the SG's

    In my case it's people in 2 Offices cannot work !!!

    It is absoutely annoying that vital, basic things like these take month to be seen and fixed ...

Children
  • 0 in reply to HelmutZengerling

    Unknown said:

    I have this Problems for more than a year now with all versions up to 9.402 ...

    The only workaround was a cron job that restarted the UTM every night after the VDSL reconnects.

    But even then, after some weeks it only helps to turn power off and on again ...

    It happens on multiple SG125  as well as on a software version runing as a VM ...

    Until now it was sporadically every 2-3 Weeks, now it's every day after pppoe reconnects. ( German Telekom VDSL )
    Suphos support ignored my requests for month ! 

    I think these support guys should talk directly to our bosses , mine are also "not amused" when they cannot work from remote.

    I also did throw out the money for the SG's

    In my case it's 2 complete Offices that cannot work !!!

    It is absoutely annoying that vital, basic things like these take month to be seen and fixed ...

Unfiltered HTML