This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MPLS internet not working in BO

Hello all,

I have just added an XG116 to my branch office, but I am unable to get the internet working via the MPLS link from the Main Office.

Previously the BO was working fine with Cisco router configured with MPLS addresses. From the XG device registration it say DNS is not working.

The main office has a dedicated Internet link and MPLS link. The main office Internet link is on WAN Port 2 and the MPLS link on DMZ port 3 and internet is shared to BO through the MPLS link.

Branch Office now has another ISP link. So now BO XG has MPLS is on DMZ port 2 and ISP2 WAN link is on port 3

However, I am unable to allow internet to BO XG via the MPLS link to BO LAN. ISP2 works well when I allow internet to LAN. When I replace XG with Cisco router, internet works.

Do I need any policies or SD WAN rules? Please assist.



This thread was automatically locked due to age.