This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN Remote Access - No Remote Access in User Portal

Product -> UTM SG210 version 9.711-5

Switched from AD-Groups to Radius Backend Authentication so we can use Microsoft MFA to login via SSL VPN.

Now VPN Access still works and my Users can access.

MFA is also being accepted. So far so good.

But if I want to Download the VPN Packages or Config in the User Portal, I can´t because "Remote Access" is missing.

I can´t be constantly giving my Users the packages manually.

Is there any Solution to this problem?

Kind Regards

Jacob



This thread was automatically locked due to age.
Parents
  • Users in the Radius Group were AD Group Users before. I Don´t know if that´s an issue.

    Ok, nope.... I just tried again using a Fresh User, which is only in the Radius Group..... Same Problem.

    I even synced again in the authentication services.

    Or maybe it´s because I have 2 SSL Profiles?! 1 for AD Group Users (no MFA) and a second for the Radius Users (with MFA)

  • That may be the issue, but I don't have experience with AD and UTM integrations.  Multiple profiles for something like this does tend to muck things up a bit, no matter what application you use.  Stuck out tongue

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Reply
  • That may be the issue, but I don't have experience with AD and UTM integrations.  Multiple profiles for something like this does tend to muck things up a bit, no matter what application you use.  Stuck out tongue

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Children