Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 3 subscribers
  • Views 2309 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[9.705-7] 5 Ghz Mesh no longer possible or a bug?

Didier Delessert

Hello,

Now - on UTM 9.705-7 - I wanted to set up a Mesh Network on 5 Ghz between 2 AP55 Access Points (as I did in the past). Unfortunately I cannot create the Mesh Network because of an error message (for both Root Access Point and Mesh Access Point): The AP 'xxx' is configured to operate on band '2.4 GHz' and use Mesh on conflicting band '5 GHz'.

Bests regards



This thread was automatically locked due to age.
Parents
  • 0

    Mesh uses one of two available radios. AP55 has radio0 with 2,4 GHz and radio1 with 5,0 Ghz. So you can pick, which you want to use for Mesh and which you want to broadcast the network. 

    __________________________________________________________________________________________________________________

Reply
  • 0

    Mesh uses one of two available radios. AP55 has radio0 with 2,4 GHz and radio1 with 5,0 Ghz. So you can pick, which you want to use for Mesh and which you want to broadcast the network. 

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML