Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 1435 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM on AWS from CloudFormation Template

RonVer Mulm
over 1 year ago

Hi,

I'm trying to get Sophos to work in the AWS cloud.

I'm having issues when deploying from the HA CloudFormation template is only giving me an Interface Eth0.

I was expecting two interfaces Eth0 (internal) & Eth1 (WAN).

My goal is to be able to NAT the workspaces for internet access.

I'm completely lost...

Any help or documentation references would be appreciated.

 



This thread was automatically locked due to age.
Parents
  • 0 over 1 year ago

    Google on site:community.sophos.com/kb HA CloudFormation and limit the time to the last year.  Are any of those helpful?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 over 1 year ago in reply to BAlfson

    Bob,

    Thanks for the reply!

    Yes I have looked at them.

    The biggest stumbling block I'm having is the single interface representing the LAN & WAN, and getting the routing worked out with a transit gateway.

    I've got AWS Sophos to work in a single VPC with a WAN & LAN, but we're wanting a HA failover implementation and that template creates only one interface.

    I'm just not finding any documentation beyond initial definition/startup that covers how to implement.

     

    Any ideas/references would be appreciated.

Reply
  • 0 over 1 year ago in reply to BAlfson

    Bob,

    Thanks for the reply!

    Yes I have looked at them.

    The biggest stumbling block I'm having is the single interface representing the LAN & WAN, and getting the routing worked out with a transit gateway.

    I've got AWS Sophos to work in a single VPC with a WAN & LAN, but we're wanting a HA failover implementation and that template creates only one interface.

    I'm just not finding any documentation beyond initial definition/startup that covers how to implement.

     

    Any ideas/references would be appreciated.

Children
No Data
Unfiltered HTML