This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Remote gateway cannot connect to SUM

I followed the instructions in the Administration Guide for Gateway Manager 4.300.pdf and already have my local Sophos gateway communicating with the local SUM. The remote gateway is configured and hitting the local UTM. 

The firewall logs show the following:

07:16:40 NAT rule #3 TCP  
***.***.***.*** : 51926

***.***.***.*** : 4433
 
[SYN] len=60 ttl=53 tos=0x00 srcmac=00:01:5c:66:c0:46 dstmac=00:1a:8c:43:40:59

So it appears that the DNAT rule is working, however the second IP in that log is the external IP of the local UTM. I do not see any reference to the LAN IP of the SUM Server in the firewall logs.

In the SUM=> Sophos UTM Manager, the allowed networks is set to 'Any'. For testing purposes, I am not requiring a shared secret. The same behavior occurred when the shared secret was required. 

The SUM is running 4.300-4  (no pending updates)
The UTM's are running  9.310-11 (no pending updates).

Below is the log from the central managment page of the remote gateway. Any help would be appreciated.

2015:04:25-07:10:53 ***x device-agent[19580]: 1 is not connected. Trying to connect
2015:04:25-07:10:53 ***x device-agent[19580]: Updating SUM IP address for path: acc/server1/server
2015:04:25-07:10:53 ***x device-agent[19580]: [1] Connecting to SUM (ip=***.***.***.***, port=4433).
2015:04:25-07:10:53 ***x device-agent[19580]: [1] Using SUM SSL connection.
2015:04:25-07:10:58 ***x device-agent[19580]: [1] SUM connection failure, retrying (ip=***.***.***.***, port=4433). SSL-connect: 'IO::Socket::INET6 configuration failed'
2015:04:25-07:11:04 ***x device-agent[19580]: [1] SUM connection failure, retrying (ip=***.***.***.***, port=4433). SSL-connect: 'IO::Socket::INET6 configuration failed'
2015:04:25-07:11:05 ***x device-agent[19580]: [1] Connection failed (ip=***.***.***.***, port=4433).
2015:04:25-07:11:05 ***x device-agent[19580]: Not reporting inotify: no role
2015:04:25-07:11:05 ***x device-agent[19580]: timer2 -> module 1 not executing: denied by role
2015:04:25-07:11:05 ***x device-agent[19580]: timer2 -> module 2 not executing: denied by role
2015:04:25-07:11:05 ***x device-agent[19580]: timer2 -> module 3 not executing: denied by role
2015:04:25-07:11:05 ***x device-agent[19580]: timer2 -> module 4 not executing: denied by role
2015:04:25-07:11:05 ***x device-agent[19580]: timer2 -> module 5 not executing: denied by role
2015:04:25-07:11:05 ***x device-agent[19580]: timer2 -> module 6 not executing: denied by role
2015:04:25-07:11:05 ***x device-agent[19580]: timer2 -> module 7 not executing: denied by role
2015:04:25-07:11:10 ***x device-agent[19580]: timer2 -> module 1 not executing: denied by role
2015:04:25-07:11:10 ***x device-agent[19580]: timer2 -> module 2 not executing: denied by role
2015:04:25-07:11:10 ***x device-agent[19580]: timer2 -> module 3 not executing: denied by role
2015:04:25-07:11:10 ***x device-agent[19580]: timer2 -> module 4 not executing: denied by role
2015:04:25-07:11:10 ***x device-agent[19580]: timer2 -> module 5 not executing: denied by role
2015:04:25-07:11:10 ***x device-agent[19580]: timer2 -> module 6 not executing: denied by role
2015:04:25-07:11:10 ***x device-agent[19580]: timer2 -> module 7 not executing: denied by role


This thread was automatically locked due to age.
Parents Reply Children
  • Hi,
    please post the dnat rule that you are using. Also a screen shot of how the utm appears in the SUM management tab.
    Next question, is the SUM an allowed user in your external UTM? I would say by looking at the log entry that it is?
    I think the DNAT rule is where we must look. I have attached a screen shot of my dnat rule to allow the utm to acces the SUM.


    Ian M

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 EAP

    If a post solves your question please use the 'Verify Answer' button.