I got a total of 30 devices connecting to one sum - 29 work perfectly fine. One does not and shows as "offline" in the Gateway Manager..
Sadly that one is in one of our bigger locations.
SUM Firmware: 4.300-4
UTM Firmware: 9.304-9
The last message I can see under SUM HEALTH is:
"starting '/usr/sbin/acc-agent.plx'"
and the live log keeps showing me this in a continuous loop:
1 is not connected. Trying to connect
Updating SUM IP address for path: acc/server1/server
[1] Connecting to SUM (ip=***.***.***.***, port=4433).
[1] Using SUM SSL connection.
[1] We are now connected (ip=***.***.***.***, port=4433).
SUM ehlo notification from [1]
Found SUM version 4.300004. Treating it as release 4.3.
Full SUM support is granted as the current SUM version isn't lower than the minimal required SUM version of: 4.2
[1] Received 0 bytes (eof).
Not reporting inotify: no role
timer2 -> module 1 not executing: denied by role
timer2 -> module 2 not executing: denied by role
timer2 -> module 3 not executing: denied by role
timer2 -> module 4 not executing: denied by role
timer2 -> module 5 not executing: denied by role
timer2 -> module 6 not executing: denied by role
timer2 -> module 7 not executing: denied by role
timer2 -> module 1 not executing: denied by role
timer2 -> module 2 not executing: denied by role
timer2 -> module 3 not executing: denied by role
timer2 -> module 4 not executing: denied by role
timer2 -> module 5 not executing: denied by role
timer2 -> module 6 not executing: denied by role
timer2 -> module 7 not executing: denied by role
I put *** for the IP - that one is correct.
I also connected via ssh to the sum and the IP of that particular utm does not show up when I do: lsof -p | grep 4433 - I got all of the others though.
This thread was automatically locked due to age.
