Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 1 subscriber
  • Views 1704 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hardware Change of SUM Client, Registration shows old Hardware

rogerseibel_01
We changed a customers Hardware from UTM 220 to SG 230 some days ago and joined the device in SUM 4 to keep the VPN's etc. running. The hardware model is still ASG 220 with the old specs. How can we update that?
Tried stopping and restarting central management on the SG 230 but that does not change anything.

Thanks for help
Roger


This thread was automatically locked due to age.
Parents
  • 0
    Hi,
    from memory you have to delete the old UTM entry and load a fresh entry eg wait until the UTM updates the SUM.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0
    Hi,
    from memory you have to delete the old UTM entry and load a fresh entry eg wait until the UTM updates the SUM.

    Ian

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
  • 0 in reply to rfcat_vk
    Hi Ian,

    deletion is not so easy. I have one old ASG v8 in my VPN-connections and with SUM 4 I am not able to delete this old connection, so i can not delete my involved ASG 220 ...
    May be I have to reset the SUM and start from a fresh installation ..

    Roger
Unfiltered HTML