Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 1 subscriber
  • Views 1624 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MAX CPU - SUM 4.000-2 Virtual

TROAB
I recently "upgraded" from ACC3 to SUM4 (downloaded and imported OVF for VMware 5, restored from backup)

After about a day, my CPU usage has been absolutely maxed out.  I've tried running it as single core or as dual core with no relief.  Memory usage appears to be OK.

I've got a total of 112 devices being managed by the system.  When I was on ACC3 I didn't have the CPU issue, of course none of my UTM9 clients were connecting properly to the ACC.

Any ideas?

(I already tried searching the forum to no avail)


This thread was automatically locked due to age.
  • 0
    You can try building a new SUM 4.102 image, and importing your config into that.  I prefer to build all Sophos UTM / SUM images from scratch rather than using an OVF... 

    See this post for details (has other links to check out):  https://community.sophos.com/products/unified-threat-management/astaroorg/f/64/t/57732

    You should be fine with 2GB of RAM... one other note, the VMware tools are built in and auto installed during installation from ISO, so no need to do anything other than these steps.

    CTO, Convergent Information Security Solutions, LLC

    https://www.convergesecurity.com

    Sophos Platinum Partner

    --------------------------------------

    Advice given as posted on this forum does not construe a support relationship or other relationship with Convergent Information Security Solutions, LLC or its subsidiaries.  Use the advice given at your own risk.

  • 0 in reply to BrucekConvergent
    Hi folks,
    what is your swap doing? From the original specifications for that many UTMs under management I would have thought you should go to 4gb.

    When you look at top which process is using the most cpu?

    Ian

    My SUM4.1 is managing 4 UTMS and is running 28% memory from 4gb. This box was originally a UTM, but was changed out due to slow performance.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

  • 0
    Hi folks,
    what is your swap doing? From the original specifications for that many UTMs under management I would have thought you should go to 4gb.

    When you look at top which process is using the most cpu?

    Ian

    My SUM4.1 is managing 4 UTMS and is running 28% memory from 4gb. This box was originally a UTM, but was changed out due to slow performance.


    I've got 5 utm installs on 512 megs of ram..I'm using hyper-v but I used an iso to install it into its VM.  Works flawlessy

    Owner:  Emmanuel Technology Consulting

    http://etc-md.com

    Former Sophos SG(Astaro) advocate/researcher/Silver Partner

    PfSense w/Suricata, ntopng, 

    Other addons to follow

Unfiltered HTML