Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 13 replies
  • Answers 1 answer
  • Subscribers 8 subscribers
  • Views 26816 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Upgraded UTM hardware but RED endpoints not coming back up

ittech

I upgraded the UTM to a newer bit of hardware and restored the config just using a backup/restore (without License, passwords, certificates/keys, endpoints) 

when I switch over to the new device everything works fine apart from the RED10 endpoints don't come back up.

I have checked the config for the RED devices and it is identical to the previous firewall so I am guessing that I probably need to copy over a certificate somewhere?

looking at the live log for the RED devices I keep on seeing "Unable to fetch RED ca object"


any ideas?



This thread was automatically locked due to age.
Parents
  • 0

    I had a similar issue and ended up with the 'ca_generate_host_key_cert' error (and found this page via a google search).  Here was my fix:

     

    Note all the RED details including unlock codes.

    Turn off the RED capability (RED management - Global Settings - RED status - off).

    Turn RED back on again & it will (tada) create a new certificate on the online service.

    Re-input the RED details.

     

    I think my issue was the RED certificate was generated with a different hostname on the unit (it had an update issue which meant it was rebuilt & restored several times).

    Hope this helps someone.

Reply
  • 0

    I had a similar issue and ended up with the 'ca_generate_host_key_cert' error (and found this page via a google search).  Here was my fix:

     

    Note all the RED details including unlock codes.

    Turn off the RED capability (RED management - Global Settings - RED status - off).

    Turn RED back on again & it will (tada) create a new certificate on the online service.

    Re-input the RED details.

     

    I think my issue was the RED certificate was generated with a different hostname on the unit (it had an update issue which meant it was rebuilt & restored several times).

    Hope this helps someone.

Children
No Data
Unfiltered HTML