Hi all,
The issue i continue to face is using a PC/Third party Hardware as an in-path transparent bridge device. I continue to read this is possible with Sophos UTM but unable to find directions to do so. I have found documentation for the regular Sophos bridge deployment but not UTM. I will gladly pay the subscription is this is possible
L2 SWITCH (LAN 192.168.100.0/24) ==> UTM (LAN) ==> UTM (WAN) ==> Firewall (LAN 192.168.100.0/24)
I want to pass L2 traffic throguh this device up to the firewall. Yes there are some limitations here but the double NAT idea is not feasible for this setup
This thread was automatically locked due to age.