Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 5 subscribers
  • Views 4063 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port forwarding with Fritzbox as router

Simon Kallenbach

Hello all, i am trying to forward a port (80) from internet to my IP cam. 

Here is my network scenario

Device:

 

Fritzbox:

 

I did forward port 80 in Fritzbox, that seems to work. I forward 4444 to Sophos for testing and it worked. I could open Sophos Webgui on public ip.

Port Forwarding on FritzBox:

 

Here is my Firewall Rules on Sophos:

And

 

Actual tried with network Any instead of WAN but didn't work either.

Here my dnat rule

 

So what I have tried.

I tired to call my Ip address with port 80 and firewall log says:

19:23:49 Default DROP TCP  
91.67.X.X : 53292
→
192.168.150.2 : 80
 
[SYN] len=60 ttl=62 tos=0x00 srcmac=cc:ce:1e:b8:0b:6b dstmac=00:1f:29:03:5a:6c

 

Then I connected a device to Fritzbox and tried to open 192.168.155.2:80 and firewall says:

192.168.150.102 : 51124
→
192.168.150.2 : 80
 
[SYN] len=60 ttl=64 tos=0x00 srcmac=fc:65:de:ad:aa:5e dstmac=00:1f:29:03:5a:6c

 

I tried so many settings like setting up snat or network masqerade. I did try even firewall rule any network using any port to any networks but that didn't work as well.

It drives me nuts.  Let me know if I missed information to share.

I do appreciate every help

thank you in advance

Simon

 
 
EDIT:
 


This thread was automatically locked due to age.
Parents
  • 0

    Hallo Simon and welcome to the UTM Community!

    Toni gave you the answer, but there are several things you should know...

    Alone among the logs, the Firewall Live Log presents abbreviated information in a format easier to read quickly.  Usually, you can't troubleshoot without looking at the corresponding line from the full Firewall log file.  In the future, you will want to post the corresponding line(s) from the full Firewall log file.

    See #1 in Rulz for troubleshooting advice.  See #2 to understand the sequence of things an arriving packet passes through.  See #3 through #5 for rules about routing and NAT rules.  You will see mention of what Toni suggested.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hallo Simon and welcome to the UTM Community!

    Toni gave you the answer, but there are several things you should know...

    Alone among the logs, the Firewall Live Log presents abbreviated information in a format easier to read quickly.  Usually, you can't troubleshoot without looking at the corresponding line from the full Firewall log file.  In the future, you will want to post the corresponding line(s) from the full Firewall log file.

    See #1 in Rulz for troubleshooting advice.  See #2 to understand the sequence of things an arriving packet passes through.  See #3 through #5 for rules about routing and NAT rules.  You will see mention of what Toni suggested.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML