Problem:
SD RED 20 mit Wifi/WLAN Modul: Wifi AP deaktiviert sich selbst
Wireless Protection -> Access Points -> Inactive Access Points
Grund:
Zugehöriger DHCP-Server ist konfiguriert auf „Clients with static mappings only“ (Network Services…
Hi,
in the LAG configuration tab of an UTM 9 also red-Interfaces are selectable for membership of a link aggregation group.
So lets assume a branch office has two red devices each with a different uplink. Would linking those red interfaces really…
After I set up a RED20, I plugged an AP into it, as I wanted to have an AP behind the RED20. I have it in Split-Tunnel Mode. The issue I had was that the AP would not show up in the list of new APs to authorize, on the UTM side. I read many many posts…
https://community.sophos.com/utm-firewall/f/remote-ethernet-device-red/80178/red15w-access-point-not-showing-up-as-pending-access-point/306267?pi2349=2 exact same issue as here. I added everything fine the first time... Then once I accepted my Access…
Hello,
we seem to have a problem similar to this tread since 9.502-4, which might be caused by this fix:
> Fix [NUTM-7962]: [WiFi] Split traffic not working for wireless clients on RED15w after upgrade to v9.5
Our setup worked well in 9.500 and…
Hallo, since our upgrade to UTM 9.500-9 last week Friday following problem occurs: - We use a Sophos SG310 now with UTM 9.500-9. Connected via RED are several branches in Europe and one branch in the US all with a Sophos RED15W in standard/split mode…
Hi Bob
Thanks for welcoming me!
I involved the Distributor's UTM-Support. Finally they gave up and involved the Sophos Support analyzing my UTM-Logs.
Outcome: The WLAN-Configuration which I pushed to the pending AP of the RED15w at the first (and…
Hi Christian
I've got exactly the same Issue/ Problem which you described.
The only difference: If I delete the Red15w, connect it to another UTM (which changes the unlock code), delete it there and connect it to the first UTM again (which again changes…
Hello,
I'm wanting to setup a RED 15w in Standard/split mode back to my UTM 9 for my remote users at our remote terminal sites but have the Wifi setup for only guest access to the internet. We are a trucking company and have drivers who want internet…
How am I suppodes to setup/enable the WiFi on a RED 15w connected to a SG-105w? The W-Lan on this remote UTM is already up and working.
In the Admin interface, I can see the interface wlan0 (which is enabled, working and bridged to eth0); as well as…
The case is this:
A customer has just WLAN in his homeoffice and would like to connect the RED-box with WLAN to his Router, which is located at another room.
Is that somehow possible? It's clear that he should have a stable WIFI-connection.
It's…
