• Vlans and different subnets behind red 20

    Hi following setup, simplified to explain an UTM on an sg320 with a red sd-20 managed switch with vlans on main side managed switch behind red with vlans red is setup in split mode Main office 10.0.0.0/16 ( vlan 1 ) remote side behind…

  • Put RED 15w in Printer VLAN on one side

    Hey guys, I have inherited this infrastructure from a previous Sysadmin. I'm in the process of putting all our printers into a dedicated Printer-VLAN. Some of our printers are at a neighboring building where we currently don't have a direct network…

  • SD-RED 60 - no route to VLAN on reds.xxx

    Hi Leute, Ich habe ein SD-RED 60 Device im VLAN-Mode (ich brauche 4 VLANs am Remote-Standort). Dieses läuft einfach an einem klassichen NAT-Router via V-DSL (z.B. FritzBox - kein exposed Host). Die SD-RED 60 ist wie folg eingerichtet (standard/unified…

  • RED-60 Branch to SG230 Head Office Deployment

    Hi Guys, Setting up a new Branch Office location that will sit about 25 Staff. I have about 100 Staff at Head Office and have an SG230 onsite for a number of years. I have a couple of smaller remote offices with 2-4 staff with a couple of RED 15's deployed…

  • Bring VLANS from our Datacenter to the Remote-Office (Red 15w)

    Is it possible to do the following: We have got a lab-environment in our datacenter. We installed a Sophos UTM and defined multiple VLANS which are attached to the VMs on our Hyper-V-Host. In our remote-office is a Sophos RED15W, connected via RED-Connection…

  • Utm vlan and red 50

    HI All. Site 1 (rca) We have a SG Utm 330: 192.168.16.1 Site 2 (si) Connected to that is a red 50 in transparent/split : 192.168.0.253 the 2 sites are on the same domain and we manage their internet with their own local firewalls. we are only…

  • RED15w Connected but no VLAN Traffic

    Hi Guys, I have a Head Office with a SG230, Dell 6248 (Layer 3), and a number of Internal VLANS - all working fine Dell 6248 is the Core Router, vLANs 10, 11, 12, 13, 15 setup with Interfaces (10.0.10.x, 10.0.11.x etc), IP routing etc and all working…

  • RE: RED15w Access Point not showing up as pending access point

    Hi Bob Thanks for welcoming me! I involved the Distributor's UTM-Support. Finally they gave up and involved the Sophos Support analyzing my UTM-Logs. Outcome: The WLAN-Configuration which I pushed to the pending AP of the RED15w at the first (and…

  • RE: RED15w Access Point not showing up as pending access point

    Hi Christian I've got exactly the same Issue/ Problem which you described. The only difference: If I delete the Red15w, connect it to another UTM (which changes the unlock code), delete it there and connect it to the first UTM again (which again changes…

  • RED 15Wi Setup Query - VOIP and subnets

    Hi Guys, I am setting up a new remote site office and will be provisioning a RED 15Wi at the location. We have an SG230 here at 'Head Office' which we've had for a year now - all working OK on this end! I understand the basic 'plug and play' config and…

  • RED 50 VLAN switch port config Solved

    When changing red 50 switch config to vlan, change the interface type in the utm also from ethernet to ethernet vlan ;)

  • Using location A subnet on a switch port at location B

    Not sure if this belongs here or under VPN. I have multiple locations that are all connected via red tunnels. Each location has its own subnet. Everything works as it is currently setup - Location A can ping / access services, etc. from location B. VLAN…
Unfiltered HTML