• Connecting VOIP phones behind a RED to PBX/SIP behind UTM on different subnet.

    Hello all, Presently we have 5 small remote offices running REDs on Standard/Unified configs, so that everything is filtered via the UTM here at HQ. At HQ we have a PBX with approx 35 VOIP phones on it and is capable of handling another 50, easily.…

  • Red 50 Standard/Split AP55

    Hi, i have a question. I have a Sophos SG210 an did set up RED50 in standard/split mode. Port mode: Switch Behind the RED50 is an AP55 with 3 wireless LAN (the same which i have @ the SG210) i am able to access all 3 WLAN and use the internet…

  • Bring VLANS from our Datacenter to the Remote-Office (Red 15w)

    Is it possible to do the following: We have got a lab-environment in our datacenter. We installed a Sophos UTM and defined multiple VLANS which are attached to the VMs on our Hyper-V-Host. In our remote-office is a Sophos RED15W, connected via RED-Connection…

  • RED loses Contact

    a deployed RED15 loses its contact to the firewall after about three hours of use. In the firewall it is then displayed as "down". A control shows that the tunnel LED of the RED is still lit. After a reboot the RED rebuilds the connection and then loses…

  • Red Modes

    Lots of info on this but I want some clarity. In Transparent/Split Mode.... 1. You get no security benefits from the UTM's web filtering or firewall? 2. The term "Split" means only traffic designated to and from your private network is sent though…

  • CIFS Durchsatz gering bei UTM RED Verbindung

    Hallo zusammen, habe zwei Standorte mittels RED (UTM zu UTM) miteinander verbunden. Über die RED-Verbindung sollen unteranderem auch Backups über CIFS übertragen werden. Normalerweise schafft der Downlink ca. 50 MBit/s. Das sehe ich auch wenn ich z…

  • Unable to Connect to RED15

    Hi Everyone We have UTM9 configured with two external NICs and one internal NIC. External NIC #1: Managed Internet WAN with PPTP port only open. Connected to router and behind an external IBM firewall. External NIC #2: Directly connected via IPoE…

  • RE: RED weisst keine IP-Adresse per DHCP zu

    Habe ein identisches Problem hier aber mit einer Red50. Nach Löschen und Neuanlage der Red50 geht es ganz normal.....bis zum nächsten Stromausfall. Vielleicht hat einer einen Tipp. Dem Hinweis vom Support auf die 9.4er Version upzudaten und zu hoffen…

  • Does a RED in Standard/Split block any traffic at the remote office that's destined to or from the internet?

    I have a client using a SG115 at the main office and a RED10 at their remote office. The remote office used to have a home router that managed the lan. We replaced it with the RED10. The RED10 is configured in Standard/Split and internet browsing and…

  • Sophos RED 15 not working

    Sophos RED15 not booting properly, System light is on, Router is blinking - somtimes it comes on and then no internet connection is possible and the red is restarting.(i can see the lease on the DHCP server but RED ist never pingable) DHCP in the network…

  • RED out of line

    I would like to connect a RED device out of line, so that its WAN interface is connected to the local LAN. This works and connects back to the UTM but can I then point a server at the RED WAN interface and have the RED route it out? Does anybody have…
Unfiltered HTML