Hello all,
Presently we have 5 small remote offices running REDs on Standard/Unified configs, so that everything is filtered via the UTM here at HQ. At HQ we have a PBX with approx 35 VOIP phones on it and is capable of handling another 50, easily.…
Hello,
we have UTM 9 Firewall ,
we have a problem with RED 15, since yesterday one of RED15 cannot connect to our firewall, on saturday we installed the firmware update, after the update everything worked.
we use another 3 REDs that work.
here…
Hello everybody - I am new to the Sophos community and I could not find a solution to my problem in the existing posts. That might be an indication that I might be missing on something very basic.
In our office we have a SG135. Two SD-RED 20 devices…
Hi Guys, Setting up a new Branch Office location that will sit about 25 Staff. I have about 100 Staff at Head Office and have an SG230 onsite for a number of years. I have a couple of smaller remote offices with 2-4 staff with a couple of RED 15's deployed…
Hi,
i have a question.
I have a Sophos SG210 an did set up RED50 in standard/split mode.
Port mode: Switch
Behind the RED50 is an AP55 with 3 wireless LAN (the same which i have @ the SG210)
i am able to access all 3 WLAN and use the internet…
Is it possible to do the following:
We have got a lab-environment in our datacenter. We installed a Sophos UTM and defined multiple VLANS which are attached to the VMs on our Hyper-V-Host. In our remote-office is a Sophos RED15W, connected via RED-Connection…
HI All.
Site 1 (rca) We have a SG Utm 330: 192.168.16.1
Site 2 (si) Connected to that is a red 50 in transparent/split : 192.168.0.253
the 2 sites are on the same domain and we manage their internet with their own local firewalls.
we are only…
Recently I have many problems with RED VPN (UTM to UTM).
On the Head Office I have 2 ISP, and I use only one to configure my VPNs.
I have 4 Branch Office, and sometimes a I get the following error in them.
2018:02:22-09:46:55 sophos1040 red_client…
I tried to configure RED15 with VirtualXG, but it did not work. The LED indicator blinking at Internet state, but suddenly off. I've done all the steps and RED15 still not connected/online. anyone can help?
a deployed RED15 loses its contact to the firewall after about three hours of use. In the firewall it is then displayed as "down". A control shows that the tunnel LED of the RED is still lit. After a reboot the RED rebuilds the connection and then loses…
Lots of info on this but I want some clarity.
In Transparent/Split Mode....
1. You get no security benefits from the UTM's web filtering or firewall?
2. The term "Split" means only traffic designated to and from your private network is sent though…
Hallo zusammen,
habe zwei Standorte mittels RED (UTM zu UTM) miteinander verbunden. Über die RED-Verbindung sollen unteranderem auch Backups über CIFS übertragen werden. Normalerweise schafft der Downlink ca. 50 MBit/s. Das sehe ich auch wenn ich z…
Hi Everyone
We have UTM9 configured with two external NICs and one internal NIC.
External NIC #1: Managed Internet WAN with PPTP port only open. Connected to router and behind an external IBM firewall.
External NIC #2: Directly connected via IPoE…
Hello everybody,
We have two branch offices that connect to our company network through RED 10 devices.
Recently, one of these two has started experiencing problems where the tunnel will fail every couple of hours. Note that only of the offices…
Habe ein identisches Problem hier aber mit einer Red50.
Nach Löschen und Neuanlage der Red50 geht es ganz normal.....bis zum nächsten Stromausfall.
Vielleicht hat einer einen Tipp. Dem Hinweis vom Support auf die 9.4er Version upzudaten und zu hoffen…
Hi, I have ASG software in 9.4 version and RED 15w. Configured in Standard/Split mode. RED is connect to internet via LTE modem on USB port. In RED configuration I added 192.168.2.0/24 (local network on utm) in Split Networks. In firewall I added rule…
I have a client using a SG115 at the main office and a RED10 at their remote office. The remote office used to have a home router that managed the lan. We replaced it with the RED10. The RED10 is configured in Standard/Split and internet browsing and…
Sophos RED15 not booting properly, System light is on, Router is blinking - somtimes it comes on and then no internet connection is possible and the red is restarting.(i can see the lease on the DHCP server but RED ist never pingable) DHCP in the network…
I would like to connect a RED device out of line, so that its WAN interface is connected to the local LAN. This works and connects back to the UTM but can I then point a server at the RED WAN interface and have the RED route it out?
Does anybody have…
Not sure if this belongs here or under VPN. I have multiple locations that are all connected via red tunnels. Each location has its own subnet. Everything works as it is currently setup - Location A can ping / access services, etc. from location B. VLAN…
