• Port Forwarding SD-RED20 Split Tunnel

    Hello! My scenario is as follows: Office A: Sophos XGS 126 Office B: SD-RED20 I would like to know if there is a possibility to open external ports to a SD-RED20 in Split Tunnel. Also, is it possible to create any VLAN on a SD-RED? I have tried to create…

  • Put RED 15w in Printer VLAN on one side

    Hey guys, I have inherited this infrastructure from a previous Sysadmin. I'm in the process of putting all our printers into a dedicated Printer-VLAN. Some of our printers are at a neighboring building where we currently don't have a direct network…

  • SD-RED 60 - no route to VLAN on reds.xxx

    Hi Leute, Ich habe ein SD-RED 60 Device im VLAN-Mode (ich brauche 4 VLANs am Remote-Standort). Dieses läuft einfach an einem klassichen NAT-Router via V-DSL (z.B. FritzBox - kein exposed Host). Die SD-RED 60 ist wie folg eingerichtet (standard/unified…

  • [Fresh From the Press: Latest KB's] Sophos UTM: Deploy RED 50 with VLANs

    Hey Community, This KB article explains how to configure a Sophos RED 50 device with tagged VLAN traffic across a trunked port. Regards,

  • RED50 - VLAN and DHCP not working

    I have an internal client vlan (VLAN12) that I need to pass to a remote office. I purchased a RED50 because the literature says, it can handle vlan’s. Only, I’ve tried every which way that is suggested by the Sophos Community and I cannot get it to work…

  • Bridge RED interface to VLAN interface

    Hi there We use an UTM SG120 @9.355 and a RED15. One of the ethernet ports ist configured as a trunk port with various VLANs. Is it possible, one of these existing VLANs bridge to the RED? Concrete: VLAN 500 @eth3 with subnet 172.16.10.1/24 should…
Unfiltered HTML