Hello,
We have set up a RED15w for a branch of one of our customers. It is configured in Standard/Split mode. There are WiFi access points on the remote site, AP30s. We have added host 1.2.3.4 in the splited networks so that the access points appear on the Sophos of the main site. Everything works so far. The RED15w Wifi device also appears.
"Separate Zone" mode is problematic, we don't want Wifi traffic to pass through the IPSec RED tunnel. All Internet traffic goes out directly. This seems to be a limitation of SOPHOS RED. So we preferred the "Bridge to AP LAN"configuration.
Now the real problem we are facing. The configuration of a hotspot for this Wifi network does not work. When we combine the RED LAN interface with the hotspot, the IPSec tunnel no longer works (the LAN client workstations can no longer contact the main site servers). We are obliged to declare the network of the main site in the "Walled Garden" for it to work again. But even with this configuration, it is impossible to run the hotspot (which is essential for this client who uses the "password of the day" for his Wifi clients). We can connect to the Wifi network but we are not redirected to the hotspo login page...
Using the "Separate Zone" function, the hotspot works for information.
Is it possible to run the hotspot with RED and Bridge to AP LAN configuration?
Thank you for your suggestions.
This thread was automatically locked due to age.
