Setting up Wifi on a RED 15w connected to a SG-105w

Hi, Adrian, and welcome to the UTM Community!

What do you see in the RED and Wireless Protection logs when you power on the RED?

Cheers - Bob

Hi Bob,

what logs exactly do you mean?

Maybe the following helps; when I'm on the dashboard, the link is as follows:

(wlan1 is the one in question).

I guess I would have to define an Access Point? 

There are no pending ones,

Clicking on this Edit button above gives me

but even when I try to add this one I don't see any Wifi around when checking with devices...

Hi Bob,

what logs exactly do you mean?

Maybe the following helps; when I'm on the dashboard, the link is as follows:

(wlan1 is the one in question).

I guess I would have to define an Access Point? 

There are no pending ones,

Clicking on this Edit button above gives me

but even when I try to add this one I don't see any Wifi around when checking with devices...

Hi Adrian,

Please refer: https://www.sophos.com/en-us/support/knowledgebase/122080.aspx

Hope that helps.

Hi,

I followed this article already for the WIFI of the 105w which works fine; but now I am stuck how to configure the wifi of the RED.

Hi guys, any news on this? I'd like the wifi on the RED a dedicated one which ideally only serves the Internet but does not allow access to any internal device.

But as said: the LINK says down, and I can't see any Access Point (which I should?)

You're right that you can't see the RED wireless until the link is up. Insert pictures of your RED and Interface definitions open in Edit.

Cheers - Bob

Bridged Internal and WLAN (0) on main site and the RED on the remote location.

I meant the RED 15 definition in the RED section.

Cheers - Bob

This one?

Thanks for your help!

That all looks good, does #1 in Rulz give you any indications?  I wonder if you're missing a masq rule 'Hummelbuehl 9 (Network) -> External (WAN)' and maybe a firewall rule.

Cheers - Bob