Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 32 replies
  • Subscribers 12 subscribers
  • Views 110032 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9.4, RED 15W Standard/Split mode , internet not working

JacekKierzek

Hi,
I have ASG software in 9.4 version and RED 15w. Configured in Standard/Split mode.
RED is connect to internet via LTE modem on USB port.
In RED configuration I added 192.168.2.0/24 (local network on utm) in Split Networks.
In firewall I added rule 192.168.55.0/24 (red network) - any - any ip accept
I use server development helper DHCP is set and DNS.
Local network working but Internet doesn’t.
I have access to all computer in local network from PC plugged to RED.

Ping DNS hostname show IP address but not respond. Web page not working.

If I add new Masquerade rule, red network to wan on UTM, internet working on PC plugged to RED 15W, but is going over tunnel. IP displayed on geolocation page show IP from Wan UTM.



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to papa_

    Well, if you got LAN clients working on standard/split, you're doing better than me. :)  I tried WLAN clients and same issue on both split and unified.  I am hoping that this is just this one device for whatever reason. I have 2 more RED 15w's that haven't been deployed and am afraid to at this point. My vendor is testing a RED15 (non w) for me tonight/tomorrow to see if it works as expected. If it does, will replace with that one.

    Thanks for your reply and input,

    T

Unfiltered HTML