This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How does RED conntect to ASG?

Hi all,
It is not clear to me how red connects to ASG I have read this "

When the RED is powered on and detects a link on the WAN interface it will try to get DHCP information. From this DHCP information, it will find DNS servers. It will then attempt to connect to a hosted provisioning server. This provisioning server will push any updates that the RED device needs, will automatically flash the device and will also push the configuration automatically. Once the RED is updated and has configuration it will make a connection to the ASG and you will then have remote connectivity. All of this happens within just a couple minutes."

What type of connection is it IPSec, SSL, or something else?

And one more question:

Does Split Tunneling mean that the remote hosts can access the internet not through ASG but through their internet connection?

thanks

This thread was automatically locked due to age.

0 shadowfly over 13 years ago

helpful link
https://support.astaro.com/support/index.php/RED_Initial_Setup
Cancel
Vote Up 0 Vote Down

Cancel
0 techuser over 13 years ago

Thanks for the reply but I have read that as you can see from my post, I need to know the protocols that are used between ASG and the RED
Cancel
Vote Up 0 Vote Down

Cancel
0 tom_01 over 13 years ago

Two things are used:

1) Port 3400 TCP: Control Connection, using SSL, authenticated with mutual X509 cert check.
2) Port 3400 UDP: Encapsulated traffic, AES256 (enc), SHA1-HMAC (auth).
Cancel
Vote Up 0 Vote Down

Cancel
0 techuser over 13 years ago

Thanks Tom
Cancel
Vote Up 0 Vote Down

Cancel