Hello!
Given the following configuration(2 ASG machines and 1 RED device):
ASG 1linked via IPSec with ASG 2
RED10 linked with the ASG 1 machine
I have sucessfully linked the RED10 device to my ASG 1 machine.
My RED10 device is configured with the following:
Uplink mode: DHCP client
Routing mode: Unified
My ASG 1 internal network scheme is :192.168.3.0/24
ASG 2 internal network scheme is: 192.168.0.0/24
My RED10 network scheme is:192.168.4.0/24
I have added a DHCP server for the RED network interface that is working correctly.
Also i have added the following rules for the packet filter :
Source:Internal network ASG 1
Service:Any
Destination:RED Network
and
Source:RED Network
Service:Any
Destination:Internal Network ASG 1
From my external machine (linked to the RED10) i can ping every machine behind the ASG 1 on my internal network,and browse shared files on the internal network and vice versa.
Till now everything worked fine.
My ASG 1 has a Site to Site VPN IPSec SAs connection with another ASG 2 that is working correctly,i can ping and browse files on the network from both sides.
What shall i do to be able to have access from the RED network to the machines located on the ASG 2 network?
i've tryed to add simple packet filter rules like :
Source:Internal network on ASG 2
Service:Any
Destination:RED Network
and
Source:RED Network
Service:Any
Destination:Internal Network on ASG 2
but with no success.
Thank you.
This thread was automatically locked due to age.
