This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Astaro RED and Beta8

Hi there

has someone a Astaro RED with the now available V8 Beta (7.951 ) runnig?
I can enter the Serial and the Device is connected to the Box but i don't see the RED as object like Ethernet Device,...

Regards Ralph

This thread was automatically locked due to age.

Parents

0 Scott_Klassen over 14 years ago

When you performed the configuration in WebAdmin, did you have Quick remote network setup checked? If not, you will need to manually configure the new interface.

I'm assuming that by "Box", you mean your ASG.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Scott_Klassen over 14 years ago

When you performed the configuration in WebAdmin, did you have Quick remote network setup checked? If not, you will need to manually configure the new interface.

I'm assuming that by "Box", you mean your ASG.

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 Jack Daniel over 14 years ago in reply to Scott_Klassen

V8 has a beta feature set exposed, but doesn't have the quick setup option that V7 does. As Scott said you will need to manually create the interface for RED (RED will be available from the HW pulldown when creating the interface), and add masquerading and packet filter rules, and set up a DHCP server if you want the RED clients to get DHCP.

RED does work well with V8, but it takes a few more steps to configure in the latest releases.
Cancel
Vote Up 0 Vote Down

Cancel