Hello,I try to setup a brand new SD-RED-60 but facing endless error leds loop.On local site (192.168.1.0/24), Sophos SG125 configuration :
On distant site (192.168.0.0/24), the RED-60 boots the following sequence :- System led blinking green...- System led solid green, Router led blinking green (long time)...
- System led solid red.
Router solid led is described in documentation as :"Either an address has been received from DHCP, or static assignment, and appears valid. The gateway address is reachable."Assuming blinking state is just before solid state (this never happens), I suppose RED cannot reach the local router gateway ?Despite this endless booting sequence, a locally connected machine on distant site can ping the RED-60 on 192.168.0.191
So I deduce the distant configuration has been downloaded and is correctly applied ?I cannot understand why the sequence cannot go further router led step.Any idea ?
// ports forwarded on local site's router TCP 3400 <192.168.0.191 > 3400 + UDP 3410 <192.168.0.191 > 3410
Do you allow DNS access to UTM and internet access for RED?
Systema Gesellschaft für angewandte Datentechnik mbH // Sophos Platinum PartnerSophos Solution Partner since 2003 If a post solves your question, click the 'Verify Answer' link at this post.
I even tried to switch RED configuration to DHCP and it actually works ! RED had got an new local IP from the router DHCP range : 192.168.0.75 and is ping-able.
Router (DHCP config page) :
Ping-ing 0.75 :
But still cannot go further.
Gateway is correct and internet access allowed for 192.168.0.75?
If 192.168.0.254 is the internal IP of UTM ... try this IP as second UTM-IP within RED-configuration
Salut et bienvenu - welcome to the UTM Community!
Please insert a picture of the Edit of the DHCP server for 192.168.0.x.
Cheers - Bob